AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Just had a Dish-Pro Sat installed with VIP722 DVR. Installer blended all 3 LNBs on roof into 1 cable (tri-plexor I assume) and installed a triplexor on back of 722 DVR. He connected the "Home Distribution" port back into the tri-plexor (for a back feed), but did not connect to my other home wiring.


Can I simply insert a diplexor at the connection point (not on roof) to send to my other rooms? (see picture) Dotted lines are what I want to insert. I do not want to go all the way back up to the roof and down again with a new lead.

 

·
Registered
Joined
·
5,019 Posts
Yes - but wire it this way -


the common port goes to the triplexor

The ANT port goes to your home distribution system

The SAT port goes up to the dish LNB


Following this wiring - it will work as intended.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top