AVS Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
319 Posts
Discussion Starter · #1 ·
Hi All,

Just wondering if this would be a decent alternative to the no longer available eeColor 3DLUT box. Combining the two Blackmagic Micro converters HDMI>SDI SDI>HDMI found here Blackmagic 3G SDI with a cheap HDCP stripper on the input side, to apply the LUT then output back to the display device.

Am I missing something here or would this be a decent alternative? Any issues to look out for?

Thanks for any advice.
 

·
Registered
Joined
·
6 Posts
Hi All,

Just wondering if this would be a decent alternative to the no longer available eeColor 3DLUT box. Combining the two Blackmagic Micro converters HDMI>SDI SDI>HDMI found here Blackmagic 3G SDI with a cheap HDCP stripper on the input side, to apply the LUT then output back to the display device.

Am I missing something here or would this be a decent alternative? Any issues to look out for?

Thanks for any advice.
For the SDI>HDMI conversion on my 4K display I use the Blackmagic Terranex mini 12G with the 32 point 3D LUT table,
Excellent unit.
I also bought the smart panel attachment but that was a waste of money.
 
1 - 2 of 2 Posts
Top