AVS Forum banner
  • Get an exclusive sneak peek into our new project. >>> Click Here

Anyone using Krell FPB monoblocks?

2798 Views 4 Replies 3 Participants Last post by  rich wu
I was wondering if any users could comment on their FPB's. I am interested in upgrading my current amps to FPB's for use in 2 channel stereo and as part of a HT system. Thank
Status
Not open for further replies.
1 - 5 of 5 Posts
I don't have the monoblocks, but am using the Krell FPB 200 to power my B&W N802 L/R speakers in our family theater room. The Krell amps are all awesome.

rick


------------------
Hey Paul, what speakers are you using ?? And what tube amp ??

rick


------------------
I have a pair of Krell FPB 250M driving Revel Studio. I am pretty happy with the sound. My dad has the FPB 200 and I think the monoblocks have slightly better imaging due lack of crosstalk between channels.

Rich
Damon,


Like the Studio, Revel Salon is a fairly easy speaker to drive so I think the 250M will be more than adequate. The Salon dips down to about 3 Ohm and the 250M will put out about 600 to 700 watts at that impedance. According to a Stereophile review of the 250M, it actually puts out 370W into 8 and 1000 into 2. I would only consider the 350M if used with some electrostatic or large Wilson speakers.

Rich
1 - 5 of 5 Posts
Status
Not open for further replies.
Top