AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,771 Posts
Discussion Starter · #1 ·
I recently purchased an Arcam P-1000 multi-channel amplifer and I am having some hum/buzz problems. Does anyone here use this amp and, if so, any similar problems?


I always figure hum/buzz is a ground loop problem, but all of my efforts with this amp have been in vain - plus the buzz is not a 60hz. hum, so not sure what is going on.
 

·
Registered
Joined
·
1,771 Posts
Discussion Starter · #3 ·

Quote:
Originally Posted by JOHNnDENVER /forum/post/18254790


You have disconected all cable / dish / direct tv sources from the system completely?

Yes, first thing I did. Then I floated the ground on the amp. then I unplugged every other component in the system. No change!


If I remove all of the RCA interconnects from the amp, the buzz goes away, but reconnecting them - even with all the other cmponents unplugged - returns the buzz.


Very strange.
 
1 - 3 of 3 Posts
Top