[Aeron_grey]

Greetings.​

I have a question regarding a problem with the following setup.​

Pc with Madvr (hdmi gpu out 1080ti)-> Av receiver (Anthem Mrx720)->Hdmi out1 JVC X7900 ​

-> Hdmi out2 PANASONIC UHD OLED TV
Bistream sound
​

​

With Hdmi copper cable Madvr could find my 2 display as separate device connected to the AV receiver.​

Now i have changed all my HDMI cable for some RUIPRO hybrid optic and Madvr can now only see one device connected (the receiver)

​

Is there any way to resolve this problem and make Madvr actually "see" 2 separate device again ? (Hdfury ? or any other way)


Thank you.
Ps: sorry for my bad english
​

 

[Jare]

Hi, I have more or less same problem. MRX720, HDMI out 1 Sony xh90, out 2 JVC N5 through ruipro. I can watch only projector, while there is no picture on TV. Tried everything, no result. Before I have copper HDMI cable, and it was woring normally (but I had to change it as copper was not sending 4 60hz).

 

[claw]

Your post is impossible to read in the forum's dark mode and with the reduced text size.