Hi, I have a DBS problem that has been confusing me.
-Mitsubishi SR-HD HD DSS Receiver
-KTI 24" dish with a built in multiswitch and sat C kit.
-Everything was working fine for a while, now no signal to be found.
I tried to align the dish, when I hook up the sat meter to the receiver, I get 18V. Then when I hook up the LNB's to teh meter, it shows "Over Current"
I took the dish apart and bypassed the multi switch, and the meter dosen't show "Over Current".
Then I hooked one of the dual LNB's back up to the dish, aligned to get a 60 on the meter (one lead direct to the receiver from the dual LNB) , and the receiver says it can't find sat one of the sats (no guide, no channels, no nothing)
I don't get it?
-Mitsubishi SR-HD HD DSS Receiver
-KTI 24" dish with a built in multiswitch and sat C kit.
-Everything was working fine for a while, now no signal to be found.
I tried to align the dish, when I hook up the sat meter to the receiver, I get 18V. Then when I hook up the LNB's to teh meter, it shows "Over Current"
I took the dish apart and bypassed the multi switch, and the meter dosen't show "Over Current".
Then I hooked one of the dual LNB's back up to the dish, aligned to get a 60 on the meter (one lead direct to the receiver from the dual LNB) , and the receiver says it can't find sat one of the sats (no guide, no channels, no nothing)
I don't get it?
