AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
411 Posts
Discussion Starter · #1 ·
What is needed to hook up a Time Warner cable HDTV receiver to a Barco Graphics 800 projector? The TWC box has component output but the projector doesn't have component input. I also don't want to loose the 1080i output of the receiver(don't want it down converted to 480p). I am also going to get a DVDO pro so this may complicate things. Will a Barco switcher do the job? Please give details and where I can cheaply find the needed components for hook up. I have a std DVD player that will be hooked up through the DVDO and DSS as well. Please help.... Note - this projector does have RGB inputs.


------------------

Thanks, SJB.
 

·
Registered
LG 55" C9 OLED, Yamaha RX-A660, Monoprice 5.1.2 Speakers, WMC HTPC, TiVo Bolt, X1
Joined
·
45,617 Posts
It probably won't be easy, but you can have TWC change the output from component video to RGBHV. There are jumpers inside the box that need to be moved.


Call the local TWC engineering dept. and keep going up the line until you find someone that know what you are talking about.


For more info: http://www.avsforum.com/ubb/Forum11/HTML/015226.html



------------------

"Better living thru modern, expensive electronics devices"

tm
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top