AVS Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
I just purchased a 3TB hard drive to use with my BD570. I formated the Drive to NTFS but the player does not recognize it. I can partition the drive with two partitions of 1.5 but when I plug in the drive it recognizes it but it shows "3 drives" instead of two.


Anyone know why it thinks their are three drives?

also

Is there a way around the player not seeing anything above a 2tb drive?
 

·
Registered
Joined
·
1,063 Posts
It's likely the same issue that PCs see with 3 TB drives, where they see a maximum of 2^64 bytes of data which limits them to around 2 TB in size. Since many players are built onto some Linux core at this point, or a chipset that has these same limitations, they probably just can't see a full 3 TB drive. You can read about the issue with PCs here: http://www.pcworld.com/article/235088/everything_you_need_to_know_about_3tb_hard_drives.html . As far as seeing 3 drives that I do not know.
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #3 ·
Thanks for your help. That makes sense. I figured out that the drive was automatically creating a 60mb hidden "protective" partition so that's why there were three.
 
1 - 3 of 3 Posts
Top