AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I have a new Vizio M550SL and an Orei BDP-M2 region free Blu-ray player. Both devices are capable of 1080p. I have the Blu-ray connected directly to the TV with the supplied HDMI cable. I can only get the Blu-ray to set to 1080i. When I go in the setting menu and select 1080p it just goes automatically back to 1080i. I am not sure what I'm doing wrong, but if anyone with exerience in similar issues can offer advice I would appreciate it.
 

·
Registered
Vizio PQ65-F1, Onkyo TX-RZ810, LG UBK90, Sony BDP-S380, Toshiba HD-XA2, M&K Speakers
Joined
·
1,138 Posts

Quote:
Originally Posted by Ronin64  /t/1472925/blu-ray-player-wont-play-at-1080p/0_100#post_23320929


I have a new Vizio M550SL and an Orei BDP-M2 region free Blu-ray player. Both devices are capable of 1080p. I have the Blu-ray connected directly to the TV with the supplied HDMI cable. I can only get the Blu-ray to set to 1080i. When I go in the setting menu and select 1080p it just goes automatically back to 1080i. I am not sure what I'm doing wrong, but if anyone with exerience in similar issues can offer advice I would appreciate it.

Since I am assuming this player did not come "region free" from the Orei factory, is it possible that whatever region free firmware was installed in this Orei player has disabled 1080p output?
 
1 - 3 of 3 Posts
Top