AVS Forum banner
Not open for further replies.
1 - 1 of 1 Posts

· Registered
87 Posts
Discussion Starter · #1 ·
Hello, I have my 1270 very close to the screen

and angeled up about 10 degrees.

The projector is aligned correctly to the screen.

On default settings the red raster

is rotated clockwise about 15 degreed, while the blue raster is straight like the green.

I guess the coils on the red gun needs to be realigned.

But now the weird thing, I can converge red to green, without problems and almost no zone adjustments.

But I can't converge blue on red, the outside part is rotated, which can't be adjusted by key, only with skew, but then the center axis would be out of line.

With zone adjustment, I can get it close, but not perfect.

It almost seems that the wrong coil position on the red actualy helps align the screen. Does anyone have more experiance here?
1 - 1 of 1 Posts
Not open for further replies.