AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
908 Posts
John, I don't have the experience on "fixing" this situation; however, I know what Dennis Erskine recommends and what I did: dry sand and 2" of plywood (3/4", 1/2", & 3/4" tongue and groove) screwed and glued to the 2 bys. There may be some other alternative, but this is a tried and proven solution.


Good luck!


Tom
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top