AVS Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
163 Posts
Discussion Starter #1
Hi Guys,


Today I managed to "snag" a i1pro for $10. Surreal! The unit looks banged up from outside, but for $10 I took a chance... It only came with the base (same serial).


I remember someone mentioning that if the i1diagnostics are good, then the unit is usually good... I'm posting my results here, does it look ok?
Warning: Spoiler! (Click to show) Start testing


General Information

Date and Time: 2014-04-08T20:20:10

Application version: 4.0.0.127, 32-bit

SDK version i1Pro: 4.1.1.1572

SDK version i1iO: 2.1.1.1572

Platform: Microsoft Windows 7 Professional Service Pack 1 (Build 7601), 64-bit


i1iO Connection Test

i1Pro not mounted on i1iO


Open instrument

Connection: Successful

Open instrument '\\?\usb#vid_0971&pid_2000#6&df2ee03&0&6#{989d6515-e122-4442-a357-751457f102a5}': Successful


Instrument information

Instrument inspection: Successful

Serial number i1Pro: 879254

Type: i1Pro (M2 only)

Revision: D

Firmware version: 503

CPLD version: 999

Dark measurement count: 41

Lamp burning time: 4.0 seconds

Spot measurement count: 14

Scan measurement count: 0

Factory calibration: 2007-09-27

Spectral Module ID: 01-d44b2e11000038


Instrument Licences

Measurement Modes: [ReflectanceSpot, ReflectanceScan, EmissionSpot]

Licensed functionality: [Has UVcut filter, Spectral values, Tristimulus, Density]

Licensed Modules:

i1Match Module "Scanner": NOT licensed

i1Match Module "Monitor": NOT licensed

i1Match Module "Printer": NOT licensed

i1Match Module "Printer RGB only": NOT licensed

i1Match Module "Printer CMYK only": NOT licensed

i1Match Module "Beamer": NOT licensed

i1Match Module "Printer Easy RGB": NOT licensed

i1Match Module "Printer Easy CMYK": NOT licensed

i1Match Module "Digicam": NOT licensed

i1Match Module "Editor": NOT licensed

i1Profiler Module "Display Profiling": NOT licensed

i1Profiler Module "RGB Printer Profiling": NOT licensed

i1Profiler Module "CMYK Printer Profiling": NOT licensed

i1Profiler Module "Printer QA": NOT licensed

i1Profiler Module "Advanced-Mode": NOT licensed

i1Profiler Module "Projector": NOT licensed


Button Test

Button: Successful


Emission test

Emission calibration: Successful

Prepare the instrument for emission measurement

White measurement: Successful (X=84.669 Y=88.963 Z=92.308)

Gray measurement: Successful (X=31.945 Y=33.069 Z=37.806)

Black measurement: Successful (X=0.144 Y=0.135 Z=0.199)

Red measurement: Successful (X=38.510 Y=19.946 Z=1.535)

Green measurement: Successful (X=31.797 Y=63.686 Z=8.602)

Blue measurement: Successful (X=15.315 Y=6.158 Z=83.317)

Emission: Successful


Button Test

Button: Successful


Noise Tests

Dark measurement: Successful (dark noise: -186.396)

Noise measurements: Successful

Noise result: Successful (electronic noise: 2.751)


Reflectance test

Reflectance Spot calibration: Successful

Reflectance Spot measurement 1: Successful (95.837, -0.383, 2.534)

Reflectance Spot measurement 2: Successful (95.847, -0.382, 2.557)

Reflectance Spot measurement 3: Successful (95.835, -0.391, 2.586)

Reflectance Spot measurement 4: Successful (95.835, -0.382, 2.549)

Reflectance Spot measurement 5: Successful (95.840, -0.399, 2.576)

Reflectance Spot measurement 6: Successful (95.838, -0.383, 2.542)

Reflectance Spot measurement 7: Successful (95.833, -0.374, 2.543)

Reflectance Spot measurement 8: Successful (95.839, -0.389, 2.568)

Reflectance Spot measurement 9: Successful (95.834, -0.376, 2.542)

Reflectance Spot measurement 10: Successful (95.839, -0.381, 2.525)

Lamp test: Successful (minL=95.833 meanL=95.838 MIT=0.0121233603 CIT=0.0112199998 LOT=6.59139156)

Reflectance drift test: Successful (0.018)

Reflectance Scan calibration: Successful


I also own a Colormunki Photo, maybe I can run dispcalgui and compare them to see if the results are somewhat similar?


Cheers!
 

·
Registered
Joined
·
5,326 Posts
The fact that none of the additional capabilities (monitor, etc.) are licensed means that this is an OEM version. Wonder where the original owner got it.
 

·
Registered
Joined
·
1,156 Posts
From the measurement counts, it looks like it's never been used.


[ X-Rite's driver updates this info, but note that ArgyllCMS's drivers do not. ]
 

·
Registered
Joined
·
163 Posts
Discussion Starter #4
Yeah, it had 0 counts until I ran the diagnostics, now it has some...


I'm attaching the grayscale and primaries measured from my 2209WA monitor (not calibrated yet), does it look right? I feel the luminance is a bit low compared to the other 2 devices? But maybe normal, I have no clue...


colors.JPG 216k .JPG file
grayscale.JPG 242k .JPG file
 

Attachments

·
Registered
Joined
·
1,033 Posts

Quote:
Originally Posted by randal_r  /t/1526518/bought-a-i1pro-for-dirt-cheap-anything-wrong-with-it#post_24596895


I would make one more suggestion; buy yourself an i1 Pro 3.

Surely you mean i1 display pro 3 (colorimeter)
 
1 - 7 of 7 Posts
Top