AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·
will run approx 20' from cable box to x1...should i put the component to vesa adapter at the cable box (run vga cable) or at the projector (run component cable)?



thanks...
 

·
Registered
Joined
·
1,534 Posts
You are better off running the longer length of component cable from an attenuation standpoint. Inside the VGA cable are 5 micro coaxials which attenuate the signal more than RG-6 or RG-59 that you would use for component. So go with the long component run and a short VGA cable.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top