AVS Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
I'm trying to do a touch up calibration on my RS 56. I altered the gamma to get it about 2.25. I noticed that the 100 IRE the blue is a little low 95% compared to 99% Green and 101 R and Error of 6.1. Last time I calibrated the set I change the gamma for Blue and Red to get it in line if it's 95IRE and below but I don't remember about 100IRE. It's been awhile. What do you change to make 100 IRE RGB balance? My Panasonic ZT60 had 100 IRE for adjusting the white balance. Do I just balance the color?
 

·
Registered
Joined
·
2,358 Posts
You could try reducing your contrast a click or two. At least errors at 100% are the place to have them as they are less noticeable.


Also, if you are using the Gamma RGB controls, you may not want to....they are quirky on the JVC's and do not always work as they should.
 
1 - 2 of 2 Posts
Top