AVS Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
pls check if the following setup will work,

i want to know if the yellow video cable from the a/v out put from camcoder can be connected through svideo input of TV using a RCA to S-video adaptor. pls see image and reply if you have tested...


I doubt the video will not work if the audio cables of RCA are ignored...

Am confused. pls help me with this people.



Thanks in Advance



 

·
Registered
Joined
·
15,010 Posts
The little inline composite-to-svideo adapters work, but you won't see as good a video image as is possible. (The inline adapters are very simple filters.) Hook the composite (yellow) video cable to the input of the adapter, and connect an S-video cable from the output of the adapter to the TV. Then press Play on the camcorder.


You don't need audio (red/white) connections, although you won't hear anything without them.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Thankyou selden
..

I would not need audio... and its just for monitoring purpose.. so I wont need the best quality.. Hope This will work...
 

·
Registered
Joined
·
15,010 Posts
You're very welcome. It'll work fine.
 
1 - 4 of 4 Posts
Top