AVS Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
I would like to change the settings on my Panasonic TC-32LX60, but I lost my Panasonic remote. My comcast remote works on my tv, but I can't access my tv's setup menu with it for some reason. How do I fix this?
 

·
Registered
Joined
·
13 Posts
Discussion Starter #3

Quote:
Originally Posted by Kupakai /forum/post/0


Which setup code on the the remote are you using for the TV, TV/0250?

i really have no clue. The guy that hooked up my cable set all of that up.
 

·
Registered
Joined
·
664 Posts
There's a good chance you can add the function to the remote, but it would be much easier if you knew what the setup code is. You can do the following to get the code:

1. Press and release TV

2. Press and hold SETUP until remote blinks twice

3. Type 990 (remote will blink twice)

4. To get the first digit of the four digit code, press 1 and count the number of times the remote blinks. If it doesn't blink at all, it means "0"

5. Press 2-4 to get the rest of the setup code.


If you can tell me what the code you get is, I can try to find the function code for the TV's menu.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #5
i got 0 blinks for the first one, and when i hit numbers 2-4 it started blinking and inputting on cable, not tv.
 

·
Registered
Joined
·
664 Posts
You have to go in sequence from 1 - 4 and you only have one chance for each digit (you can't press 2 again to the get the second digit for example). Otherwise it will drop you out of that mode and do what you described. See if you can try again.


If you can't get it to work, I'm assuming it is TV/0250 and you can try this:

Turn on the TV and point the remote to the TV.

1. Press and release TV

2. Press and release SETUP

3. Type 00103

After releasing the last digit, did the TV respond by going to menu?
 

·
Registered
Joined
·
13 Posts
Discussion Starter #8

Quote:
Originally Posted by Kupakai /forum/post/0


You have to go in sequence from 1 - 4 and you only have one chance for each digit (you can't press 2 again to the get the second digit for example). Otherwise it will drop you out of that mode and do what you described. See if you can try again.


If you can't get it to work, I'm assuming it is TV/0250 and you can try this:

Turn on the TV and point the remote to the TV.

1. Press and release TV

2. Press and release SETUP

3. Type 00103

After releasing the last digit, did the TV respond by going to menu?

yup, but i cant move up and down or select anything.
 

·
Registered
Joined
·
664 Posts
OK, I saw your post after I posted my response. You can do this:


1. Press and release TV

2. Press and hold SETUP until the remote blinks twice

3. Type 994

4. Press and release SETUP

5. Type 00103

6. Press and release MENU

The remote should blink twice to confirm.

Now go to TV mode and try the MENU key. It should bring up the TV's menu.


You are probably also going to need a couple of other keys not pre-programmed in TV/0250:

UP arrow = 00039

DOWN arrow = 00043

LEFT arrow = 00038

RIGHT arrow = 00042

OK = 00041


Repeat the above steps for each and replace the numbers in step 5 and the key you want to assign the function to in step 6.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #10

Quote:
Originally Posted by Kupakai /forum/post/0


OK, I saw your post after I posted my response. You can do this:


1. Press and release TV

2. Press and hold SETUP until the remote blinks twice

3. Type 994

4. Press and release SETUP

5. Type 00103

6. Press and release MENU

The remote should blink twice to confirm.

Now go to TV mode and try the MENU key. It should bring up the TV's menu.


You are probably also going to need a couple of other keys not pre-programmed in TV/0250:

UP arrow = 00039

DOWN arrow = 00043

LEFT arrow = 00038

RIGHT arrow = 00042

OK = 00041


Repeat the above steps for each and replace the numbers in step 5 and the key you want to assign the function to in step 6.

It worked! Thank you so much man!
 

·
Registered
Joined
·
13 Posts
Discussion Starter #12
i didn't see anything on that list that says anything about changing the screen size. like changing the display to hd fill or changing to 4:3 or anything like that. how can i do that?
 
1 - 12 of 12 Posts
Top