AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Finally 503cmx is on its way, should arrive tomorrow.


I wanted to thank everyone who help me tracking the shipment

through Electrograph/Eagle.


I wanted to be prepare with all the necessary accesory so I can hookup

over the weekend. I had couple of simple question.


1. I already have rest of the home theater setup. I will have 2 component

input, one from DVD player and one from Comcast cable box routed

through Denon 3803 to Pio 503. Should I route VCR S video connection

directly to 503 or route it through 3803 using up conversion ?


2. Is 5002 installation straightforward ? Any help/tips will be great.


3. Besides component cable running to 503 from 3803 and wall mount

do I need any other accessory to complete the installation ?


Thanks.
 

·
Registered
Joined
·
1,746 Posts
You're aware that the 503 has BNC connectors for the component inputs? (And the 5002 has a BNC for the composite input.) If this is news to you, then you need 3 RCA-BNC adapters. (The 5002 comes with one adapter, I believe, but if you have to buy them, might as well get three.) Radio Shack sells them - do a search here, there have been plenty of requests on where to get them.


Enjoy!


[If you're buying new component cables, you could get RCA to BNC cables and avoid the adapters.]
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top