AVS Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
354 Posts
Discussion Starter #1
Anyone know where to get a ceiling mount for a G11, or how to make one? This would probably help my setup a lot.


thanks.


------------------

ham
 

·
Registered
Joined
·
2,741 Posts
Also, Dave Beatty makes a hushbox for the G-series DILA's that can be ceiling mounted. That way you get the ceiling mount and a hushbox all in one. I am waiting for the arrival of one for my G-15. You can see some pictures at whisperflow.com.
 

·
Registered
Joined
·
1,735 Posts
Look here


Good luck with the PJ


------------------

STOP HDCP on DVI

Don O
 

·
Registered
Joined
·
914 Posts
A cheap mount can be made out of 3/4" plywood and some angle brackets. My 1/2" piece of plywood is starting to warp, I'd use at least 3/4" stuff if I did it again. Then again it's lastest 10 months without a problem so far.


Mark
 

·
Registered
Joined
·
141 Posts
Ham,


I am going with a Whisperflow and will have a Chief ceiling mount (pipe mount) available soon. Let me know if you are interested.


Jay
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top