[FBlack]

I spoke to my local distributor tday. They will take an advance order of a CS-1 at $1,995. They should arrive next week. I also searched their website for more information. Basically, does the CenterStage output at 480P or 1080I or ???. (1080i would fill the screen I think) I plan to use it on a 73" MIts. Does it control any aspect ratio? Is it appropriate to use this product with a Mitsubishi?

 

[toxic candy]

I don't know where you live, but you might want to check the powerbuy for these puppies.... you might get it for less

Check the long thread dedicated to the CS1 and CS2.

The thread will also answer your question for the output resolution.


Pierre.

 

[Socio]

It does 4.3 and 16.9 ratios, 16.9 will be full screen on a HDTV.

 

[Dave Harper]

Quote:

Originally posted by Socio ...16.9 will be full screen on a HDTV.

Only if the source is also 16:9 (1.78:1). If the ratio is any higher (1.85:1, 2.35:1, etc.) you will still get some letterbox bars on top and bottom. You may not see the bars with a 1.85:1 ratio movie since it's so close to 1.78:1, but it depends on how much overscan your set has.

 

[Jim Boden]

Go to http://www.focusinfo.com/products/ce...enterstage.htm for PDF product documentation.