AVS Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
47 Posts
Discussion Starter · #1 ·
Anyone with the Chenbro SAS expanders get a firmware update yet?


I built my storage server over the weekend and quickly saw that when I am using the Chenbro 12803 I get drive failure messages on the same drive bays consistently. When bypassing the Chenbro and going directly to the RAID controller the same drives and slots perform fine.


I am using a 3ware 9690SA-4I with the latest firmware and drivers. I am also using the Norco 4220 chassis.
 

·
Registered
Joined
·
47 Posts
Discussion Starter · #2 ·
To answer my own question, the firmware update is about 3 weeks out according to Chenbro.


Chenbro suggested to try to use an LSI based RAID Controller to see if problems still exist.


Anyone had a chance to try this?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top