AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
I have upgraded my CI formware from 5.32 to 5.36 now 2.36 because of the VS 4.0, which I assume is 4.36


Features added are to this version :-


- Rename and Chroma Delay in Setup removed.


- Frame Sync replaced with Sync Tracking.


Sync Tracking allows fine adjustment of digital clocks with VS 2.0 to allow perfect sync with the scanning circuits of the target display device.


Range of adjustment is +6 to -6, 0 is default.


- New function, Position Adj. has been added to Menu, you can via remote control adjust position of the image vertically and horizontally.


- New function, Remote Ctl = VS 136 or AUX 053


>


Two selectable IR codes sets to avoide conflict with other equipment.


Cheers,


Martin.
 

·
Registered
Joined
·
1,735 Posts
Martin,

please check and see if the centering of a 4:3 frame in the middle of a 16:9 screen produces the correct AR. Earlier versions of the firmware produce an image of excess width (8%).


Thanks

Don O'Brien
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top