AVS Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
112 Posts
Discussion Starter · #1 ·
Looking at my leftmost LNB (I believe it's for Sat B) on my Terk S25, I noticed right out of the box that the translucent white plastic domes that cover the elements of the LNB that are usually translucent white was cloudy, blotchy opaque white. It looks like someone oversprayed or splashed white glue or something, and is a cosmetic defect, at least. After I set up the dish, which was quite easy, I noticed that Sat B had the lowest signal - about 78, while Sat A and C were both in the high 80's. Should I ask for an exchange at Circuit City? I don't know if the opaque blotchy cosmetic defect is causing the lower signal or, as think I've heard before on this forum, this Sat is just harder to capture. Technical RF or EE question: Will the frequencies for this Sat even be attenuated by plastic or glue, however ugly it may be?


Thanks,

Young
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top