AVS Forum banner
1 - 3 of 3 Posts

· Registered
1,240 Posts
Discussion Starter · #1 ·
I figured this was the most appropriate forum, so here goes.

I'm helping a co-worker remodel our NOC (Network Operations Center).

The basic equipment is as follows:

5 1080p 65" LCD displays showing various network conditions on the front wall

9 workstations each featuring a 30" 2560x1600 LCD

I figure the 5 1080p displays can be driven from 1 computer w/ multiple video cards. Each of the 9 workstations will be driven by a dual-link capable video card.

I need some sort of video switcher/ processor that can take a DVI input from any one of the 9 workstations and throw it up on one of the 5 wall displays.

A DVI 9x5 matrix switch supporting up to 2560x1600 resolution, with the ability to scale to fit the target rez (currently 1920x1080, but hopefully higher later).

Said device should be controllable from any of the 9 workstations, or from the server driving the 5 displays.

Does such a beast exist?
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.