AVS Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
93 Posts
Discussion Starter · #1 ·
Hi,


I am trying to converge my 1272 to the source(HTPC) with the AVIA DVD.


How do you get so that the DVD is displayed instead of the internal test patterns.


I searched the forum but didn't really get a clear answer.



Thanks


BD
 

·
Registered
Joined
·
859 Posts
Once you have selected the adjustment that you wish to make (size, skew, lin, bow, etc) just hold down the Test button until the source signal is displayed (about 5 seconds).
 

·
Registered
Joined
·
784 Posts
BD

I'll second Sean's post, but you may have to press and hold the TEST key for more like 10 seconds. Also, I've found it faster to do a convergence with the source signal driving the PJ, but using the PJ's internal test patterns. When that is perfect, I do a final zone adjustment using the source signal itself. Remember to make a zone map so you know what zone number corresponds with each physical zone.


Regards,
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top