AVS Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
603 Posts
Discussion Starter #1
I am trying to program this remote for my Yamaha HT receiver. I can get it to power on/off the receiver but can't get the volume. The directv box says there are 9 available codes, but only 6 are listed with some dots after that look like this, ...... how do you find the remaining codes? It's weird why I can power the machine off and on but can't program the volume. Any help would be appreciated.
 

·
Registered
Joined
·
1,848 Posts
The volume keys never work initially with ANY audio code in the white directv remotes. Not until you do the following: first use code 31076 for the yamaha, next there has to be a tv code programmed to the tv device or the volume keys won't work. then:


1. av1 or av2

2. press and hold MUTE & SELECT for two blinks

3. enter 9 9 3

4. press SELECT
 

·
Registered
Joined
·
603 Posts
Discussion Starter #3
Thank you so much Edmund! Your instructions worked like a charm. It says in the directv manual(on the receiver) after entering 9 9 3 to hit the volume key. No wonder it wouldn't work. Thanks again.
 
1 - 3 of 3 Posts
Top