AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
When I am watching either DVD, VHS or TV on my esprit projector a dark cloud or dark shading appears in top 1/3 of my screen. It is like the top part of the pictures brightness is turned way down. It stays there until there is a scene change then it goes away. It is not regular in its appearence and sometimes it is smaller and sometimes it is bigger. But without fail it comes and goes with scene changes. Help, Help with any suggestions. I am using a Esprit 2000 in quad mode. This projector is made by Am Pro. Thanks Allan


Thanks Curt for the suggestion but it still doesn't work. Anybody out there have any other suggestions?:confused:
 

·
Registered
Joined
·
18,507 Posts
This may be due to a ground loop. try lifting the ground pin (breaking it off (did I say that?)) and see if it goes away.


Otherwise try a different scan rate lower than 64Khz and see if it improves.


Curt
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top