AVS Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter · #1 ·
any of these 2 drivers works on a THT?

DD2515

Series 2500a

Voice Coil Diameter 2.5"

Magnet Weight 160 oz

Power Handling RMS/Peak 750/3000

Suspension 80 mm

Nominal Impedance D4.0 Ohm

DC Resistance D3.6 Ohm

Model: 2515a

Rec Box (cubic ft): 4.0

Port Area (sq in): 66

Port Length (inches): 16

Woofer Diameter: 15"

Free Air Resonance: 25 Hz

Qts: 0.36

Qes: 0.397

Qms: 4.16

Vas: 77L

Sensitivity: 90 dB

Shipping Weight: 31 lbs

JL 15WO

Free Air Resonance (Fs): 24 19.2 Hz

Electrical Q (Qes 0.403

Mechanical Q (Qms): 11.29

Total Speaker Q (Qts): 0.389

Equiv. Compliance (Vas: 12.63 ft3

One-way, Linear Excursion: 0.340 in

(Xmax)* 8.6 mm

Efficiency (1W/1m)**: 89.8 dB

Effective Piston Area (Sd 130.2 in2 (0.0840 m2)

DC Resistance (Re)***: 3.977.57

Nominal Impedance 4

Power Handling (continuous): 150W

Mounting Depth: 7 in (178 mm)

Mounting Hole Diameter: 13.8125 in (351 mm)

Driver Displacement: 0.110 ft3 (3.11 litres)


thanks
 

·
Registered
Joined
·
2,195 Posts
the THT design is specific to the Dayton 15" DVC, you can't swap drivers in horns and hope it will work.



Horns are very driver specific.
 

·
Banned
Joined
·
15,491 Posts
Technical questions about my designs should be posted on my forum. Thanks.
 

·
Registered
Joined
·
21,345 Posts
"Horns are very driver specific."


but at the same time, many horns can accomodate many drivers. the op needs to post the thiele-small specs before his question can be answered.
 

·
Registered
Joined
·
107 Posts
Discussion Starter · #5 ·
thanks for the replies.


i live in the philippines and no shops carry the daytons. only popular car subs are available locally. also, i can get these 2 subs (used) almost free of charge



i will register on BFM website to know more before buying the plan.


the above info is all i can find on the DD2515 sub.
 
1 - 5 of 5 Posts
Top