[rcgait1973]

Been trying to update the firmware on my Denon 2112CI for months now without any luck. As usual when I turn on the receiver I am prompted that there is an update so I know I am connected to my network.


As first I built a wireless client bridge using an Asus 520 WL-520GU router loaded with dd-wrt with the UPnP service turned off.

With this setup Pandora and Internet radio would work but the connection would drop out on a regular basis. So I connected the Denon up directly to my Verizon Fios router. Now Pandora and Internet Radio work without ever dropping out. But I still can't get the unit to connect to the Denon server to perform the firmware update. It try's for a few minutes and then fails with an error.


Anyone have a solution to this problem?

 

[jdsmoothie]

Your best bet is to try another router. Otherwise check to see if there is an authorized repair facility in your local area listed on Denon's website. As noted on the firmware changelog info posted in post #6 of the Denon AVR-XX12 Owner's thread, one of the updates resolves a no connection issue.

http://www.avsforum.com/t/1334369/the-official-denon-avr-xx12-model-owners-thread/0_100#post_20422390

 

[graysailor]

I keep getting the same message but when I press ENTER I go nowhere. The manual of course is almost useless. No idea what to do next. Going to the Denon website and they don't even list the 211CI receiver under product support.

 

[emanonco]

Updates

Has anyone figured this out? I have having the same issues!