AVS Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
Hi Guys, I have the URC MX-810i remote + MX-810i ProWizar program, Av receiver Denon AVR-3311 (with 2 HDMI monitor outputs on toogle button in Remote Control) and Sony TV and Sanyo projector.


I need the discrete codes for the selection of HDMI Monitor 1 and 4 outputs by IR for Denon AVR-3311.


I found the thread " HDMI Monitor Out Discrete Code AVR 3311 Denon "


* a discrete code for this selection by IR

* you would need to use RS232

* They have them for the 4311. They may have a firmware update for 3311 that allows them to be used.

HDMI MONITOR SELECT 1


0000 0070 0000 0032 0080 0040 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0030 0010 0030 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0030 0010 0030 0010 0010 0010 0030 0010 0ACE

HDMI MONITOR SELECT 2


0000 0070 0000 0032 0080 0040 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0030 0010 0030 0010 0030 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0030 0010 0ACE

How can I import these 4311 Codes for HDMI monitor outs into the MX-810i ProWizar program?


I need it very badly to program correctly the remote. Any help would be very appreciated. Thanks
 

·
Registered
Joined
·
11 Posts
You need to find someone with a Pronto or an URC programmable remote like the MX-850, 900, 880, 980 etc. They can import or copy and drag the HEX codes into their remote and then you could LEARN the codes into your remote from their remote.


Try to find a local URC dealer.


Hope this helps.


Jeff
 

·
Registered
Joined
·
6 Posts
the mx-810 wizard has a universal browser you can do it there


1st. on main menu select tune up

then select relable or rearrange screen buttons

click next select device you want to add your buttons

name them whatever you wish don't put too much thought here into it

after you have made all your buttons select main menu

then choose browser

copy and paste your ir code into hex editor

find the device where you added buttons

use the drag icon drop each button where you want

go back to relable or rearrange screen buttons rename to what you want them to be

go back to main menu select tune and then solve automated activity problems
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top