AVS Forum banner
Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
169 Posts
Discussion Starter · #1 ·
Hello Mark Hunter,

I have a DLA-G3010Z .

My DILARD 2.1 had never run with it, so i am waiting for the new DILARD Upgrade.

Is Dilard 2.2 work with DLA-G3010Z ?

If it does,tell me when I could have DILARD 2.2 and the colorimeter.

Thank you for your help.


I apologize for my bad english.



------------------

Alfred Cylla


[This message has been edited by CYLLA (edited 08-24-2001).]
 

·
Registered
Joined
·
169 Posts
Discussion Starter · #2 ·
Hi,

is it possible to have a response for the only one poor DLA-g3010z owner ?.


------------------

Alfred Cylla
 

·
Registered
Joined
·
169 Posts
Discussion Starter · #3 ·
Hi,

Am I really the only one owner of a DLA-G3010Z ?


------------------

Alfred Cylla
 

·
Registered
Joined
·
581 Posts
Hi alfred

I believe you are the only owner right now.

I did not know it was available yet.

I'm sure Mark will coment as soon as he gets on the web.

But can you give us an idea of how this projector is performing,and have you seen other projectors to comparre it to.


Thanks Hugo
 

·
Registered
Joined
·
169 Posts
Discussion Starter · #5 ·
Hi Hugo,

I have purchase this DLA-G3010Z because I am sensitive to rainbow on DLP projector.

I use it with a Dream scaler.

The DLA-G3010Z is a 1365 x 1024 but it does not recognize 1365 x 1024 in input.

It select 1280 x 1024 maximum.

The only way to use it in 1365 x 1024 is choosing the mode "panel" in the Resize menu fonction.

The DLA-G3010Z is very luminous with crisp image.

Very poor black level even in a dark room.

It is difficult to see details in dark image.

The white is burned, I have to set brightness at -4 and contrast at -20


I hope you understand me, because my english is very bad.

Thanks for your response.


------------------

Alfred Cylla
 

·
Registered
Joined
·
4,525 Posts
Alfred,


Your English isn't all that bad, really. However, you need one of those world clocks on your desktop so you know when the USA is asleep. http://www.avsforum.com/ubb/biggrin.gif


I am still hoping that I can get a loaner DS-1 from JVC (same as the G3010Z), but I have to be honest with you: the 2.2 release might come out before I get the projector!


This means that there might be a Dilard 2.2Z that follows up shortly after the 2.2 release, but I need to stop delaying this pending release and stop adding new features or it will never go out. There is always the next version...


Drop me an email if you're really upset to hear this and we'll talk.


Thanks!


Mark
 

·
Registered
Joined
·
169 Posts
Discussion Starter · #7 ·
Hi Mark,

thanks for your response.

I'll send you a private E-Mail.



------------------

Alfred Cylla
 

·
Registered
Joined
·
169 Posts
Discussion Starter · #8 ·
Hi, Mark

do you want my DLA-G3010Z for testing DILARD 2.2.

I can send it to you if you want.

You have to tell me how to proceed.


------------------

Alfred Cylla
 

·
Registered
Joined
·
4,525 Posts
Hi Alfred,


That's a mighty long journey for such an expensive piece of electronics. Let me see if I can get a loaner stateside. If not, I will drop you an e-mail.


Mark
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top