AVS Forum banner
Status
Not open for further replies.
1 - 7 of 7 Posts

·
Premium Member
Joined
·
807 Posts
Discussion Starter · #1 ·
Anyone else have a similar problem? I have to execute a command via "test" in order for it to see the projector!


Makes me have to have a monitor connected or start the D-ILA by getting on a stool and hitting the button.


Larry


------------------

DFAST is EVIL! BOYCOTT ANTI-CONSUMER 5C/DVI/HDCP/DMCA MANUFACTURERS!

Join Electronic Freedom Foundation
http://www.eff.org/
 

·
Registered
Joined
·
4,525 Posts
Hi Larry,


So, does the Dilard status bar say "Projector Not Connected" when the program starts?
 

·
Premium Member
Joined
·
807 Posts
Discussion Starter · #3 ·
Yes Mark


Larry


------------------

DFAST is EVIL! BOYCOTT ANTI-CONSUMER 5C/DVI/HDCP/DMCA MANUFACTURERS!

Join Electronic Freedom Foundation
http://www.eff.org/
 

·
Premium Member
Joined
·
807 Posts
Discussion Starter · #4 ·
I've had no line since last thursday, any idea on this Mark?what am I doing wrong?


Larry


------------------

DFAST is EVIL! BOYCOTT ANTI-CONSUMER 5C/DVI/HDCP/DMCA MANUFACTURERS!

Join Electronic Freedom Foundation
http://www.eff.org/
 

·
Registered
Joined
·
4,525 Posts
Hi Larry,


Does it affect anything besides the display of the status bar?


It definitely sounds like a bug (and will be fixed), but if everything still works just fine, and the only issue is that the text in the status bar says "not connected" instead of "standby", it won't get a hot fix immediately but I will put it into the final build list for 2.2.
 

·
Premium Member
Joined
·
807 Posts
Discussion Starter · #6 ·
I am away from home till Oct 9th but as I recall it simply wouldn't operate anything until I went to test mode or did a projector detect and had the D-ILA on by pushing a button manually.


Larry


------------------

DFAST is EVIL! BOYCOTT ANTI-CONSUMER 5C/DVI/HDCP/DMCA MANUFACTURERS!

Join Electronic Freedom Foundation
http://www.eff.org/
 

·
Premium Member
Joined
·
807 Posts
Discussion Starter · #7 ·
Maybe I wasn't clear,


The projector can be in standby or "on" but it is definitly connected. To get Dilard to see it I have to do a "test" on a particular function, then it says the projector is connected. Not before.


Appreciate help here


Larry


------------------

DFAST is EVIL! BOYCOTT ANTI-CONSUMER 5C/DVI/HDCP/DMCA MANUFACTURERS!

Join Electronic Freedom Foundation
http://www.eff.org/
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top