AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter · #1 ·
I am hoping I am not already seeing a short-fall in my home theater wiring.



But, I plan on having 1 secondary TV on the left wall and a projector on the ceiling. During the fall, I will often have 2 football games on.


I ran HDMI to both locations, but I only ran 1 RG6 to my media closet. I could add another one, but I rather not as it is not the easiest location to work with.


So my question is, can I take that one RG6 that would normally feed a DTV receiver and take it through any kind of splitter in order to feed two C31 clients?


I really wish there were some ethernet based C31 clients... I have tons of network ports available!



Thanks,

Brad
 

·
Registered
Joined
·
1,106 Posts

Quote:
Originally Posted by bdunn13  /t/1471699/directv-genie-c31-wiring-question#post_23288383



So my question is, can I take that one RG6 that would normally feed a DTV receiver and take it through any kind of splitter in order to feed two C31 clients?


Thanks,

Brad

Assuming you have a Genie/SWM system, you can feed two C31 clients with one coax with a 2 way green labeled splitter > http://www.solidsignal.com/pview.asp?p=split2mrv&d=directv-sws-2-satellite-2-way-wide-band-mrv-compatible-splitter-(2--2150-mhz)&sku=874409002404
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top