AVS Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
I'm considering the Panasonic 36HX41 but I need to know if you can disable the scanning velocity modulation in the service menu. I'd also like to know if you can adjust the color decoder in the service menu.


Surely someone out there has tried this on the Tau series.


Thanks,

Darin
 

·
Premium Member
Joined
·
169 Posts
I have two CT-34WX50s Tau sets. On my sets you can turn off the SVM in the user menus. You do not have to go into the service menu. In the input settings where you adjust the video, briteness, color, sharpness, etc choose standard mode at the top. Then go down the menu to the advanced settings and turn them on. Then go down into the advanced settings and set VM to 0. This will turn off The SVM on my Panasonic sets. Check and see if this works on yours.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top