Our native mobile app has a new name: Fora Communities. Learn more.

Discrete codes for Xa1 or A1?

397 Views 6 Replies 5 Participants Last post by sfhub, May 13, 2006

Jon Spackman

Discussion Starter · May 11, 2006

I see a text document with a discrete on, Has anyone got an off yet its been a little while?

Thanks,

Jon

Save

Status: Not open for further replies.

1 - 7 of 7 Posts

jimmylee

· #2 · May 11, 2006

I cannot learn the down arrow on my Pronto TSU3000.

All other buttons ok but this single one.

Anyone have the code to plug in?

Thanks

Save

RichB

· #3 · May 11, 2006

Quote:

Originally Posted by jimmylee
I cannot learn the down arrow on my Pronto TSU3000.

All other buttons ok but this single one.

Anyone have the code to plug in?

Thanks

I have it but not here. I will check back tonight. I have found that it is best to learn the codes away from windows and daylight. Once I closed the shades, I had no problems.

- Rich

See less See more

Save

rdjam

· #4 · May 11, 2006

Quote:

Originally Posted by jimmylee
I cannot learn the down arrow on my Pronto TSU3000.

All other buttons ok but this single one.

Anyone have the code to plug in?

Thanks

Pressing the down arrow more gently, may help- it's the bad button on the Toshiba remote. See these posts for a little more detail.

http://www.avsforum.com/avs-vb/showt...&post7538208

http://www.avsforum.com/avs-vb/showt...&post7631454

See less See more

Save

jimmylee

· #5 · May 11, 2006

Here is the down arrow code if anyone needs it.

900A 006D 0000 0001 45B5 817E

Someone on Remote Central was most kind to provide it.

Save

jimmylee

· #6 · May 11, 2006

rdjam said:
Pressing the down arrow more gently, may help- it's the bad button on the Toshiba remote. See these posts for a little more detail.

------------------

I must say after programming the Pronto to run the A1, a lot of problems went away.

No more hesitation with commands, lockups, strange things going on.

The HD DVD's I made with UMF5 had three deep menu's and they would not work right until I started using the Pronto.

Seems like more than just the down arrow button that was sending weird commands to the A1.

Save

sfhub

· #7 · May 13, 2006

Quote:

Originally Posted by fueler1
I see a text document with a discrete on, Has anyone got an off yet its been a little while?

In the current firmware there is no discrete off, only discrete on.

There is a factory reset IR that will power down the unit, but I don't think that will work very well

The usually trick of DiscreteOn followed by Power Toggle, to simulate discrete off, doesn't work because Toshiba takes over 50 seconds to respond to IR after being turned on.

Save

1 - 7 of 7 Posts

Status: Not open for further replies.

Top Contributors this Month