[Michael2000]

I have a 211K, and mine is working fine, and I assume the 222K has the same IR remote system. I did have to experiment a lot to get it to work with my PVR508, and I just kept those settings for the 211K. Here is what I did to get it to work:


IR Training - TV Signal, select to 3 Digit Codes (4 digit codes will put a zero on 3 digit number), select "number and wait", Select Desktop Box, Dish Network,

Code S1775, then select IR speed (slow) for changing channels.


Hope this helps!


Michael

 

[Michael2000]

I don't believe I had any problems with this. My HTPC is down right now for a reformat, but will let you know when it is back up and running.


One thing you could try to reducing the delay between digits to something shorter.


The manual that came with the 211K, says that pressing and holding the SAT button is used to program the remotes. I tried pressing and holding my "0" button, and it did not do anything on my 211K other than changing it to the first channal 002-00, since there is no "0" channel. They may do something different with the 222K, since the 211K only has one tuner.


Michael