AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
Hi .. I am thinking to go for a Bell 6000 for my barco 1208. Does someone know if the sync of the vga port is negative ?


Thanks


Marc
 

·
Registered
Joined
·
7,137 Posts
Marc,


I picked up an ExpressVu 6000 HDTV decoder recently (same hardware as the Dish 6000 box supposedly) and it works fine with my BarcoGraphics 800. I thought I might have to build a special sync inversion circuit to go from pos to neg sync, but it's not required!


I use a HD15 -> 5BNC cable from the 6000 directly into the RGBHV inputs on the Barco with the H and V sync BNC's combined with a T-connector. Note: I did not try it without combining the syncs. It may not work without the T-connector. Since I need this for my GeForce2 HTPC output, I figure I would try the HDTV box this way first as well.


Kal



------------------

BarcoGraphics 800 ([email protected])

Silent HTPC DVD (RF modified GeForce2, Audiophile 24/96 for S/PDIF out)

8' wide 1.4 gain 16x9 painted fabric screen


[This message has been edited by kal (edited 09-04-2001).]
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top