AVS Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
access the service menu on the SHARP AQUOS LC 26D40U model, and change the setting from NTSC to PAL, so as I may watch my TV in the UK?


I am told instruction is in the service manual but this is not usually provided to consumers. Sharp have not been helpful. Can someone help please.


Thanks

C
 

·
Registered
Joined
·
2,594 Posts
 http://www.avsforum.com/avs-vb/showthread.php?t=622573


* While the LCD is on, unplug the power cable.

* Then while pressing the {INPUT} & {VOL -} buttons on the remote,

plug the power cable back into the outlet.


* When it powers up you will see a little "k" appear in brackets.

* Then on the TV, press and hold {VOL -} & {CH -} down and release.

* The Service Menu will be displayed.


* Use {CH+} {CH -} buttons to navigate

* Use {VOL+} {VOL -} buttons to adjust the value.


* Turn the set off to exit the Service Menu.


Some Sharp LCDs have an additional service menu if you press Display on your remote while in the main one.
 
1 - 2 of 2 Posts
Top