AVS Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
538 Posts
Discussion Starter #1
i am going with a tc 2000 15 in a 10 CF inclosure tuned to 15 hz . i will be building 2 of these . i have a ep 2500 amp . should i run single 4 ohm vc or 2ohm dv . the amp will be ran stereo . i was thinking because most amp will run 2 ohm stereo i should go with the DV .
 

·
Registered
Joined
·
4,421 Posts
It doesn't matter much in your scenario, I would just go for the svc myself, but its completely up to you.


*Edit, wait, are you planning on running both of these from a single EP2500? FYI, the TC2k comes in single or dual 4ohm VC's not single 4ohm or dual 2ohm. In this case, I would definitely get the dual 4ohm as the can wired in parallel for a 2ohm load each, allowing more power to be pumped in.
 
1 - 2 of 2 Posts
Top