AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
59 Posts
Discussion Starter · #1 ·
OK folks,


I'm about ready to shoot myself http://www.avsforum.com/ubb/frown.gif I just installed the DirecTV oval dish with the 4x4 multiswitch and have spent hours trying to get the 101 signal. I live in 91801 zip and am using these coordinates: 49.5 el 151.9 az and 101.7 tilt. Im able to get about an 83 signal on the 119 but not even one tick on the 101. I've done a search and have seen a reference to a soft reboot (auto config) of the DTC 100 to recognize the 101 but don't know how to do it.


It seems odd that I cant even get a reading on the 101, I would have thought I'd get at least 20-40. I've checked the lnbs and ran cable directly through the receiver bypassing the multiswitch with no luck. I'm also using the oval dish/2 lnb setup in the dish pointing menu. The mast is plumb and level. I'm a bit stuck. Any ideas?


thanks,


eric
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top