AVS Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
3,902 Posts
Discussion Starter · #1 ·
Can someone tell me what the differences between the DTC-100's "372" and "40b" firmware are?

Thanks Kenny
 

·
Registered
Joined
·
2,081 Posts
The main differences are that the original 3.72

firmware is not a true PLUS System firmware.

As the 3.72 will get all the locals in the 900's

and the 4.0b and later will only get your locals

dependent on your true location (zip code).


The people looking for these are those that wish to use

hacked cards or other means to take advantage of this.

This will come to a end sooner or later.

If you have one of these you can cash in on a few extra

$'s on ebay. (I would say take the money and run)

I'm sure there may have been a few other bug fixes

mixed in with the update.
 

·
Registered
Joined
·
227 Posts
Aside from the above, the latest DTC-100 code fixed the proprietary timing RCA was using on the vga output. The new code allows the user to select the timing to use. This makes the DTC-100 work much better with TV brands other than RCA.


Also, the HD mode is now selectable via the remote


------------------

jgb


[This message has been edited by jgb (edited 06-11-2001).]
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top