AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
I just had a new DTC-100 with oval dish (2 LNB) installed by Best Buy. I have a media room where I want the HDTV and 3 other TV's in the house that don't need HDTV. The installer only hooked up my media room projector. What's the best way to hook up the other 3 TV's? Should I leave the dish supplied switcher mounted on the dish and run 4 cables to each receiver or is there a way to move the switcher into the attic and run the 4 cables from there?


Thanks
 

·
Registered
Joined
·
322 Posts
You can leave the switch on the dish. Just run one cable from the box to each receiver - I'm currently using two.


If you really want to put the switch in the attic, then you'll have to run four cables from the dish to the switch no matter how many receivers you have and then one cable to each receiver from the switch.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top