AVS Forum banner
Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
424 Posts
Discussion Starter · #1 ·
What strength readings are you getting for DTC100 on 101/110/119 after the install?


Before the install I got 89/74 readings for 101/119.


After the install I get 89/74/60! readings for 101/110/119.


If this is a problem, what could be the cause? Bad combiner? Bad (short) coax?


jdg
 

·
Registered
Joined
·
1,193 Posts
Those are almost exactly the readings I got. The 60 means that you might be more vulnerable to degradtion from rain and such, but otherwise, forget it and enjoy. If you're not getting breakups, you're seeing the same PQ you'd get with a 100 reading.
 

·
Registered
Joined
·
107 Posts
JohnDG,


How did you connect the three dish set-up? What kind of switch did you used? Do they all need to be dual lnbs for a multi-room set-up? I want to do the same, but is hopelessly lost! Thanks.


tixin.
 

·
Registered
Joined
·
424 Posts
Discussion Starter · #7 ·
tixin: check the other threads -- I'm not an expert on this.


All: given that some experienced no drop in readings, what could be the cause? Should I ask Terk for another combiner?


jdg
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top