AVS Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,590 Posts
Discussion Starter · #1 · (Edited)
Dual 12", Marty cube?

Thought I should post in correct sub forum...


I have a 12x12 room, quite small but size be damned I'm going to make use of it. I use to have the full Marty with the 460ho 18" driver and an inuke3000dsp, though in a larger room.

Due to the small size I'm dealing with I think an 18" box just won't fit let alone 2 of them. I have some infinity 1262w drivers sitting around and Im thinking of buying another inuke3000dsp and making 2 boxes, I guess a Marty cube sized down for 12" driver.

I'm curious if two of these 1262w will get anywhere near the output of that 18" Marty in this small of a room. If I could get 17-20hz in the 90dB+ range I think I would be happy given the cost. Any advice one rhe cubic volume needed and port size/length would be helpful!
 

·
Registered
Joined
·
2,165 Posts
Dual 12", Marty cube?

I've got more output than I need from a pair of sealed 1260ws in my bedroom, which is 11x14. I have flat response down to 20Hz, and for music they barely get going, though I don't listen at huge volume either. Ported, you could go as small as 3 CFM net, and as large as you want. Something Martycube sized would get a ton of performance from that driver, just need to fine tune the port dimensions.
 

·
Registered
Joined
·
1,590 Posts
Discussion Starter · #3 ·
I've got more output than I need from a pair of sealed 1260ws in my bedroom, which is 11x14. I have flat response down to 20Hz, and for music they barely get going, though I don't listen at huge volume either. Ported, you could go as small as 3 CFM net, and as large as you want. Something Martycube sized would get a ton of performance from that driver, just need to fine tune the port dimensions.
What amp are you using with yours and what rms?
 
1 - 4 of 4 Posts
Top