AVS Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter #1
Looking at this 10 inch driver and wondered what the consenus is on it. Don't here much in the ED drivers.

Qts: .36

Qes: .38

Qms: 6.00

Fs: 24.1Hz

Re: 4.4

Vas: 52L

Mms: g

Bl: 17T*m

SPL: dB

Sd: 350cm²

Xmax: 25.4mm

Voice Coil: 50mm


Magnet Width: 6.5"

Cutout Diameter: 9.200"

Mounting Depth: 6.125"

Weight: 20lb

Total Height: 6.75"

Displacement: .07 ft³

Outside Diameter: 10.9375"

http://www.edesignaudio.com/product_...roducts_id=818
 

·
Registered
Joined
·
105 Posts
Discussion Starter #2
This driver seems interesting for one because of the neo and ceramic in the motor.


From the initial design notes on blog:

e5.10 - New 10″ Subwoofer platform.

Rolled into production as 11Ov.2 sells out.

Price : TBA


Comex cone.

Under basket venting.

25.4MM One Way

Neo + Ceramic Hybrid Motor (new platform)

New larger spider (much more throw)

Woven tinsels (always a must)
 

·
Registered
Joined
·
8,595 Posts
It's probably a fine driver.

However, the crazies around here typically start at 15s and move up through 21s. So, 10s aren't typically being considered for the kinds projects talked about here...it would take dozens of them.
 
1 - 3 of 3 Posts
Top