AVS Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
309 Posts
Discussion Starter · #1 ·
Hello.


I have an ELAN 880 which has Video input 1-8 and video output 1-8.


Its suppose to be that:


Video input 1 corresponds to video output 1.


Video input 2 corresponds to video output 2


Video input 3 corresponds to video output 3


etc.......



However for some reason, Video output 1-8 are all showing from video input 1.


every single video output is from video input 1 even though I have cameras connected to other video inputs.


Does anyone know if maybe there is a setting I need to change or why something like this is going on?



Thanks for your help.
 

·
Registered
Joined
·
467 Posts
default is 1-1

you will need to issue output command then input command to switch
 

·
Registered
Joined
·
2,880 Posts

Quote:
Originally Posted by eddiebrock /forum/post/0


Hello.


I have an ELAN 880 which has Video input 1-8 and video output 1-8.


Its suppose to be that:


Video input 1 corresponds to video output 1.


Video input 2 corresponds to video output 2


Video input 3 corresponds to video output 3

...

To reiterate what the others have said, that is not how it works. It is a video matrix, so Input 1 could be routed to Output 1, and/or Output 2, and/or Output 3, etc. Likewise, Input 2 can be routed to Output 1, and/or Output 2, and/or Output 3, etc. though two inputs cannot share the same output at the same time.


You can change inputs and outputs with the Elan IR remote. If you have a Pronto, I think they also have the codes listed at remotecentral.com.


CJ
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top