AVS Forum banner

1 - 7 of 7 Posts

·
Premium Member
Joined
·
1,179 Posts
You use the component out connections on the back of the HC4 to inputs on the TV.


You need to be sure the OSD is enabled in the HC4 configuration and the TV is set to the inputs you have the HC4 connected to.
 

·
Premium Member
Joined
·
1,179 Posts
Did you connect the Component Video OUTPUTS (not the inputs) on the HC4 to the TV?


Did you select the correct inputs on the TV?


If the OSD is enabled in the HC4 settings then you should see the OSD on the TV.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #5

Did you connect the Component Video OUTPUTS (not the inputs) on the HC4 to the TV?

 

Yes.


Did you select the correct inputs on the TV?

 

Yes.


If the OSD is enabled in the HC4 settings then you should see the OSD on the TV.

 

interface -  on Screen display -  OSD Enable.ok

 

But not work.

 

I from Brasil. Sorry about my english.
 

·
Premium Member
Joined
·
1,179 Posts

Quote:
Originally Posted by pauloantunes  /t/1526640/elan-g-in-television#post_24658861


THANKS.

NOW IS WORKING.

So how did you get it to work?
 
1 - 7 of 7 Posts
Top