[ryanb650]

I just received my 12v wireless trigger remote from Elite Screens, but the connectors don't match the 12v trigger output on my projector. My project is a Panasonic A100U. The trigger connectors on the projector are the same type as a headphone jack, but the cable that came with the remote has a yellow tip that is too big for the connection. Sorry if this is a stupid question, but I am not sure if I am missing something obvious.


Thanks,

Ryan

 

[bluer101]

I just looked up what you are talking about. I might have to get one. Well anyways the end you are talking about will need to be cut off or get an adaptor from that plug to 3.5 mono plug. I will try to find one on the net.


Or cut it off and hit radio shack for a mono 3.5 plug with pigtail.

 

[ryanb650]

Could I just replace the cable with a 3.5 to 3.5 mono cable?

 

[bluer101]

Sure, I did not know that was plugged into the remote.


Here is what I found but your idea is better.

http://www.rpelectronics.com/310-635-2-1-x-5-5mm-jack-3-5mm-plug.html


Let me know if it works.


What screen do you have? How much was the RF remote wireless kit?

 

[ryanb650]

I have the cinetension 2 and it was $65 drop shipped from B&H Photo. I am going to swing by the rat shack today. Ill let you know how it turns out. Thanks for the help.

 

[The Driver]

I have an Epson 8350 (awesome, btw); and something like this adapter from eBay - item 221643337866 - may work...

Good luck.