AVS Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
362 Posts
Discussion Starter · #1 ·
I've been told that this transcoder from VDigi Electronics is very poor ("crap" was the word used) for handling video, other than for gaming. Assuming the right cables are used, what is the difference between this transcoder and others that are (supposedly) better suited for handling video from sat recievers, etc.?


Thanks, Don.
 

·
Registered
Joined
·
492 Posts
I have some of these aswell.

I was told they are poor quality because they don't strip off sync pulses, But you could buffer/strip the data off of the output with some extron modules. I didn't try it yet as I have other transcoders.

No matter what black level will float and colors look a little off with these. I used them for video games only
 

·
Registered
Joined
·
1,550 Posts
Not worth buying unless you are really on a tight budget .


They crush blacks horribly, as well as other pic degrading features.


I had one for my son's games on his projector , but for a few bucks more there a lot of other choices .


They do work though, and if you are not that picky it might be OK for Games .



Bruce
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top