AVS Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I am trying to trouble shoot the cause of the "green-ghosts" for a better word that I can getting on my brand new 51G500. Firstly these only appear when my T160 is connected via DVI. With S-Video and component the picture is clean.


The pictures I have attached show the effect around the guide logos. I just happen to use these as they are easy to repeat. The effect occurs on any area of the TV that has a bright-white area adjacent to a dark area.


As you can see from the pictures the effect occurs always to the right of a bright white area showing up as a green band/ghost. As you can see there has to be a sizeable white area for the effect to occur. It does not happen with the text. Also as you can see everything else is sharp and clear.


Since I am only getting the effect with the digital DVI connection and the whole signal path is digital until it gets decoded in the TV I am leaning towards an issue with the D/A converter in the TV ?


I am open to all suggestions and comments !!
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top