AVS Forum banner
  • Our native mobile app has a new name: Fora Communities. Learn more.

firmware update 98.3.1 on AVR 354

1029 Views 1 Reply 2 Participants Last post by  Coctyle

OK, the firmware update only ran on XP. I was able to go through the whole process with no errors, AFW v, DSP 1.2.9. only problem is the unit will not go into standby any more have to hard power down.  Original problem, video switching stopped working.
1 - 2 of 2 Posts
When you say video switching stopped working, do you mean HDMI inputs/outputs stopped working? That is the problem I have with mine. If I even select an input that is set to use HDMI, the menu becomes very sluggish. It will take a minute or more to switch from one menu item to the next, so switching something to use a different audio and/or video input is very tedious and frustrating. Therefore I have been reluctant to try to update the firmware again, since I would have to reset everything.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.